Apply First Coat of Non-Slip Spray

What happens in this clip

Before applying the non-slip spray, shake the can vigorously for two to three minutes to ensure the product is thoroughly mixed. Once mixed, hold the can approximately 6 to 12 inches away from the wooden stairs. Apply the spray using continuous, sweeping motions across the surface of the stairs to ensure an even, thin coat. Avoid concentrating the spray in one spot to prevent excess buildup.

Goal: Apply an even first coat of the non-slip spray to the stairs

What's used

Tools

• Slip Doctors Extra Fine Clear Grip Spray Slip Doctors

About the full video

This DIY project details the application of a clear, extra-fine grip spray to wooden stairs, specifically to improve safety for aging dogs who may slip. The process involves proper shaking, applying two coats in sweeping motions with an hour of drying time in between, and includes a troubleshooting tip for clogged nozzles. The final result is a non-slip surface, beneficial for both pets and people.

Step 3 of 5: Apply Anti-Slip Coating

Choose an anti-slip coating designed for wood or general-purpose use. Stir the coating thoroughly according to the manufacturer's instructions. Using a brush or roller, apply a thin, even coat to the first tread. Work your way across the stairs, applying one tread at a time to ensure consistent coverage and avoid creating a slip hazard on newly treated areas. Allow the first coat to dry completely as per the product's recommendations before applying a second coat, if necessary, for added durability and grip. Ensure good ventilation during application.

Open this step in the guide

Every video in How to Make Oak Stairs Less Slippery

1. Step 1: Clean the Oak Stair Treads

   • 0:03–0:07 Prepare and Clean Stairs
   • 0:45–0:50 Scrub and Agitate the Wood Surface
   • 0:35–0:44 Apply Wood Cleaner to Stairs

2. Step 2: Sand the Stair Treads

   • 2:06–2:52 Sand Stair Treads and Risers
   • 1:01–1:17 Sand Stair Treads
   • 1:05–1:18 Vacuum Dust and Perform Fine Sanding

3. Step 3: Apply Anti-Slip Coating

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 0:11–0:25 Apply First Coat of Non-Slip Spray (this video)
   • 2:27–3:10 Apply Paint to Stairs

4. Step 4: Apply Anti-Slip Tape or Strips

   • 1:12–1:19 Prepare Steps and Apply Non-Skid Strips
   • 0:02–0:06 Apply Anti-Slip Strip
   • 1:14–1:23 Apply Non-Skid Strips to Steps

5. Step 5: Install Anti-Slip Treads or Risers

   • 0:18–0:37 Install Lower Stair Treads and Risers