Clean Glue Squeeze-out
From How to Fix Squeaky Stairs from Underneath with Shims and Glue Blocks · Step 6 of 6 · Video by Flynndogg Woodwork
Showing 13:42–14:26 of the source video. Watch the full video with every moment.
What happens in this clip
After a glue-up, particularly with wood glue, excess glue (squeeze-out) may appear on the surface of the wood. Use an old rag to initially wipe off the majority of the wet glue. To address any remaining residue that could prevent stain absorption later, take a small, damp sponge (can be cut from a larger sponge for convenience) and gently wipe the glued area. Keep a small container of water (e.g., Tupperware with water) nearby to re-dampen the sponge as needed. This method ensures all glue residue is removed, resulting in a clean surface ready for finishing without visible glue lines. Store the damp sponge in the sealed container for future use.
Goal: Effectively remove excess wood glue squeeze-out from joints using a damp sponge, preventing dried glue spots that can interfere with staining.
What's used
Tools
- Old rag
- Small container (Tupperware)
- Small sponge
Materials
- Water
About the full video
This video presents several practical hacks and techniques for applying wood glue to repair cracked lumber, stabilize knots, efficiently assemble miter joints without clamps, and effectively clean up excess glue, aiming for durable and strong results in woodworking projects.
What's said in this clip
out let me show you what I'm talking about so let's go back to that piece of wood that had the crack that we fixed earlier the first thing that we want to do is to take an Old Rag and wipe off all the excess glue now one problem with this is there'll still be some blue residue on that wood so if you apply some stain later that wood glue will show up and that's where this sponge comes into play you simply take that sponge get it a little damp and wipe off all that excess glue and it's as simple as that who would have thought having a little bit of damp sponge in an old Tupperware could save you a lot of trouble and heartache when you go to stain your wood and not only that but if you dump your water out and rinse out your sponge you can use this little hack as many times as you want so our next hack is not so much a hack but
Automatically transcribed from the source video.
Step 6 of 6: Clean Up
Wipe away any remaining excess wood glue with a damp cloth. Sweep or vacuum up any wood shavings or dust created during the process. Organize and put away your tools and materials.
Every video in How to Fix Squeaky Stairs from Underneath with Shims and Glue Blocks
Step 1: Locate Squeaky Tread
- 0:14–0:34 Fix Squeaks from Underneath with Shims
- 0:13–0:20 Locate Squeaky Floor Section
- 2:45–5:32 Identify Squeak Causes and Mark Fixings
Step 2: Prepare Shim Material
- 0:14–0:34 Fix Squeaks from Underneath with Shims
- 0:15–0:38 Shim Gaps from Underside
- 3:09–3:51 Tighten Loose Risers with Shims
Step 3: Apply Wood Glue
- 6:40–7:13 Apply Wood Glue (Back Risers)
- 0:22–0:34 Apply Wood Glue
- 6:22–6:49 Apply 5-Minute Wood Adhesive
Step 4: Insert and Secure Shims
- 4:46–5:44 Attach Support Blocks and Secure Wedges
- 4:08–4:28 Final Gap Filling and Tread Reinforcement
- 3:09–3:51 Tighten Loose Risers with Shims
Step 5: Test for Squeaks
- 4:28–5:00 Test the Repaired Stairs
- 0:14–0:34 Fix Squeaks from Underneath with Shims
- 5:45–6:01 Test the Repaired Stairs
Step 6: Clean Up
- 10:52–11:00 Clean Up Mess
- 13:42–14:26 Clean Glue Squeeze-out (this video)
How to Fix Squeaky Stairs from Underneath with Shims and Glue Blocks
This project outlines the steps to fix squeaky stairs from underneath by using shims and glue blocks to secure the treads and risers.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.