Install the Safety Gate
From How to Install a Hardware-Mounted Baby Gate at the Top of Stairs · Step 5 of 6 · Video by DIYeasycrafts

Showing 3:37–4:15 of the source video. Watch the full video with every moment.
What happens in this clip
With the custom bracket securely mounted, it's time to install your safety gate. The design of the bracket allows the gate to slide in from underneath. To install, slightly tilt the gate and guide the threaded rod of its mounting pad into the slot of the bracket. Once the rod is in the slot, the mounting pad will settle into the routed recess. The bayonet-style design prevents the gate from being pushed forward or pulled back. You still have access to the tension screw on the gate's rod, allowing you to adjust the tension for a perfect and very secure fit.
Goal: Securely attach the safety gate to the newly installed brackets
What's used
Materials
- Mounted Bracket
- Safety Gate
About the full video
This DIY project guides you through creating custom, secure mounting brackets for child and pet safety gates. These brackets address common issues with standard pressure-mounted gates, such as damage to drywall walls and insufficient security against pushing or pulling. By using a molding block and hardwood backing, the project provides a sturdy bayonet-style mount that protects your walls and keeps the gate firmly in place, enhancing safety for children and pets.
Step 5 of 6: Attach Gate to Brackets
Carefully lift the baby gate and align its corresponding mounting points with the installed brackets. Follow the manufacturer's instructions for your specific gate model to attach it to the brackets. This may involve sliding the gate onto posts, clicking it into place, or using additional fasteners. Ensure the gate is securely attached and does not wobble.
Every video in How to Install a Hardware-Mounted Baby Gate at the Top of Stairs
Step 1: Identify Mounting Surfaces
- 0:24–0:31 Install Lower Wall Mounts (First Side)
- 0:13–0:18 Prepare Mounting Boards
- 0:23–0:32 Install Wall-Mount Baby Gate
Step 2: Mark Bracket Positions
- 2:59–3:10 Mark, Drill, and Secure Top Mounting Bracket (Side 1)
- 1:21–1:35 Position Gate and Mark Wall
- 1:26–1:45 Position Gate and Mark Wall
Step 3: Drill Pilot Holes
- 1:05–1:12 Mark and Drill Wall Holes
- 1:50–2:02 Mark and Drill Bottom Pilot Holes (Side 1)
- 1:18–1:48 Drill Pilot Holes and Insert Anchors
Step 4: Attach Mounting Brackets
- 1:43–1:50 Secure Wall Brackets
- 3:44–4:19 Secure Mounting Brackets (Side 2)
- 3:14–3:37 Mount the Bracket to the Wall
Step 5: Attach Gate to Brackets
- 3:44–4:19 Secure Mounting Brackets (Side 2)
- 1:48–1:55 Mount the Gate into Brackets
- 3:37–4:15 Install the Safety Gate (this video)
Step 6: Adjust and Test Gate Functionality
- 17:06–18:29 Test Gate Functionality and Latch
- 1:30–2:19 Final Assembly and Testing
- 3:49–4:22 Verify Security and Functionality
How to Install a Hardware-Mounted Baby Gate at the Top of Stairs
This project outlines the steps to securely install a hardware-mounted baby gate at the top of a staircase, ensuring child safety.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

