Secure Wall Brackets

What happens in this clip

Align the wall mounting brackets with the drilled holes and screw them securely into the wall using a screwdriver. Ensure they are firmly attached to support the gate.

Goal: Fasten the gate's mounting points to the wall.

What's used

Tools

• Screwdriver
• Screws Regalo
• Wall Mounting Brackets Regalo

About the full video

This video provides a step-by-step guide on how to install a Regalo 2-in-1 Playard and Safety Gate. The installation process covers unfolding the gate, attaching connectors and wall mounting brackets, securing the gate with caps and screws, and demonstrating how to open the door mechanism.

Step 4 of 6: Attach Mounting Brackets

Align each mounting bracket with the pilot holes drilled in the previous step. Insert the screws provided with the baby gate through the bracket holes and into the pilot holes. Use a screwdriver or drill with a screwdriver bit to tighten the screws until the brackets are firmly secured to the surface. Ensure there is no play or movement in the brackets.

Open this step in the guide

Every video in How to Install a Hardware-Mounted Baby Gate at the Top of Stairs

1. Step 1: Identify Mounting Surfaces

   • 0:24–0:31 Install Lower Wall Mounts (First Side)
   • 0:13–0:18 Prepare Mounting Boards
   • 0:23–0:32 Install Wall-Mount Baby Gate

2. Step 2: Mark Bracket Positions

   • 2:59–3:10 Mark, Drill, and Secure Top Mounting Bracket (Side 1)
   • 1:21–1:35 Position Gate and Mark Wall
   • 1:26–1:45 Position Gate and Mark Wall

3. Step 3: Drill Pilot Holes

   • 1:05–1:12 Mark and Drill Wall Holes
   • 1:50–2:02 Mark and Drill Bottom Pilot Holes (Side 1)
   • 1:18–1:48 Drill Pilot Holes and Insert Anchors

4. Step 4: Attach Mounting Brackets

   • 1:43–1:50 Secure Wall Brackets (this video)
   • 3:44–4:19 Secure Mounting Brackets (Side 2)
   • 3:14–3:37 Mount the Bracket to the Wall

5. Step 5: Attach Gate to Brackets

   • 3:44–4:19 Secure Mounting Brackets (Side 2)
   • 1:48–1:55 Mount the Gate into Brackets
   • 3:37–4:15 Install the Safety Gate

6. Step 6: Adjust and Test Gate Functionality

   • 17:06–18:29 Test Gate Functionality and Latch
   • 1:30–2:19 Final Assembly and Testing
   • 3:49–4:22 Verify Security and Functionality