Mix and Pour Concrete
From How to Pour a Concrete Landing Pad for Deck Stairs · Step 5 of 10 · Video by Phil Foo

Showing 1:58–2:31 of the source video. Watch the full video with every moment.
What happens in this clip
Prepare the concrete mix in a wheelbarrow, typically two bags at a time. Create a depression or 'bowl' in the center of the dry mix and pour water into it. Use a shovel to gradually mix the cement from the edges into the water, continuously adding more water as needed until you achieve a consistency similar to thick soup. Pour the mixture into the prepared forms, spreading it with a rake or shovel to ensure it fills all voids and crevices and removes any trapped air. Overfill the forms slightly to allow for screeding.
Goal: Fill the formwork with freshly mixed concrete
What's used
Tools
- Safety Glasses
- Shovel
- Water Hose
- Wheelbarrow Kobalt
- Work Gloves
Materials
- Concrete Mix
About the full video
This DIY project provides a step-by-step guide to construct a concrete pad for a new AC condenser. The process includes site preparation, excavation, laying an aggregate base, building formwork, mixing and pouring concrete, and finishing the surface with a smooth and broom texture.
Step 5 of 10: Mix and Pour Concrete
Using a concrete mixer or mixing the concrete in batches with a shovel and wheelbarrow, combine the concrete mix with water as per the manufacturer's instructions. Aim for a workable consistency that is not too wet or too dry. Carefully pour the mixed concrete into the formwork, spreading it evenly with a shovel or rake to fill the entire space.
Every video in How to Pour a Concrete Landing Pad for Deck Stairs
Step 1: Excavate Area
- 13:17–15:33 Prepare Stair Base and Pour Concrete Pad
- 0:04–0:15 Site Preparation and Trench Digging
- 4:20–8:36 Prepare & Pour Concrete Pad
Step 2: Install Formwork
- 2:04–2:33 Build and Position Concrete Form
- 0:33–0:47 Formwork Installation
- 0:00–0:34 Lay Out and Assemble Initial Form Boards
Step 3: Add and Compact Gravel Base
- 2:21–2:33 Add & Compact Basecourse
- 3:15–4:05 Lay and Compact Gravel Base
- 0:20–0:38 Prepare Gravel Base
Step 4: Place Rebar or Wire Mesh
- 2:45–3:06 Add Steel Reinforcement (Rebar)
- 1:30–1:40 Add Wire Mesh Reinforcement
- 5:41–6:46 Rebar Placement for Reinforcement
Step 5: Mix and Pour Concrete
- 0:30–0:42 Pour and Level Concrete
- 3:10–3:41 Pour and Screed Concrete
- 1:58–2:31 Mix and Pour Concrete (this video)
Step 6: Screed the Concrete
- 0:04–0:13 Screed the Concrete
- 0:24–1:01 Screed the Concrete Surface
- 0:17–0:45 Screed the Concrete Surface
Step 7: Float the Concrete
- 0:16–0:25 Float the Concrete Surface
- 0:44–0:46 Hand Float Concrete Surface
- 1:15–1:29 Float Concrete
Step 8: Finish the Concrete
- 0:07–0:11 Trowel for Smooth Concrete Finish
- 10:04–11:22 Final Troweling and Finishing
- 3:30–4:49 Concrete Floating and Troweling
Step 9: Cure the Concrete
- 2:08–2:39 Cure Concrete
- 0:57–0:59 Cure Concrete and Remove Forms
- 5:50–6:12 Cure the Concrete
Step 10: Remove Formwork
- 8:43–10:04 Remove Form and Backfill
- 4:03–4:08 Remove Formwork
- 0:52–0:54 Remove Formwork
How to Pour a Concrete Landing Pad for Deck Stairs
This project involves creating a stable and level concrete landing pad at the base of deck stairs. The process includes excavating the area, building a form, and pouring and finishing the concrete. This pad provides a safe and durable surface for accessing the deck stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

