How to Make Thin Repairs to Damaged Concrete with QUIKRETE®

Moments in this video

1. 3:03–3:11 Protect and Cure the Repair From Concrete Step Repair, Step 5: Cure the Patch

   After applying either type of concrete repair material, protect the repaired area. Shield it from foot traffic for at least 24 hours and from vehicle traffic for a minimum of three days to allow for proper curing and strength development. QUIKRETE Concrete Patching Compound will form a skin in about 20 to 40 minutes and harden completely in 1 to 2 hours, depending on temperature, humidity, and the depth of the patch. For all concrete repairs, proper curing is essential for long-term durability.

2. 3:11–4:13 Apply QUIKRETE Concrete Patching Compound From Concrete Step Repair, Step 3: Apply the Patching Compound

   As an alternative for non-structural, small, aesthetic repairs, or for filling cracks, QUIKRETE Concrete Patching Compound is a pre-mixed, ready-to-use acrylic latex formula. Before applying, thoroughly stir the compound with a margin trowel or putty knife to ensure a uniform consistency. Apply it to a clean, dry concrete surface. Spread the compound evenly over the repair area and texture it to match the surrounding concrete. For a smoother finish, wet your trowel occasionally. For patches or cracks over 1/4 inch thick, apply the compound in multiple thin layers, allowing each layer to dry completely before applying the next.

The guide that use this video

• Concrete Step Repair