Allow Compound to Cure

What happens in this clip

The curing time will vary significantly depending on the specific products used, temperature, and humidity. It can range from a few hours to several days. Avoid foot traffic or placing heavy objects on the repaired area during this time. Once fully cured, the surface will be ready for additional treatments such as cleaning, etching, or applying concrete stains, as suggested by the project's goal.

Goal: Allow the patched area to fully cure and dry according to the patching compound and liquid resurfacer/sealant manufacturer's instructions before proceeding with any further treatments like staining.

About the full video

This video demonstrates a quick DIY method for repairing cracks, chips, and imperfections on a concrete surface using a combination of patching compound and a liquid resurfacer or sealant. The process involves filling the crack with a paste-like compound and then smoothing and blending the repair with a brushed-on liquid for a seamless finish, preparing the surface for subsequent treatments like staining.

Step 6 of 6: Cure the Repair

Protect the repaired area from direct sunlight, extreme temperatures, and heavy traffic while it cures. Some products may require misting with water periodically to ensure proper curing, while others should be kept dry. Refer to the product packaging for specific curing times and methods. Avoid walking on or applying any load to the repaired step until the full cure time has elapsed.

Open this step in the guide

Every video in How to Repair a Chipped Concrete Step Edge

1. Step 1: Clean the Chipped Area

   • 0:12–0:55 Clean and Prepare the Damaged Area
   • 0:46–1:13 Clean Out Debris and Loose Chunks
   • 1:36–3:50 Clean Out Loose Concrete and Debris

2. Step 2: Undercut the Edge (if necessary)

   • 0:46–1:13 Clean Out Debris and Loose Chunks
   • 1:36–3:50 Clean Out Loose Concrete and Debris
   • 0:43–1:02 Prepare Damaged Concrete and Install Forms

3. Step 3: Mix the Concrete Repair Compound

   • 0:39–0:49 Mix Patching Cement
   • 1:41–1:54 Mix Concrete Patching Compound
   • 1:03–2:18 Mix the Concrete Patcher

4. Step 4: Apply the Repair Compound

   • 1:55–2:11 Apply Concrete Patch to Chips
   • 1:15–4:04 Apply Two-Part Epoxy Filler
   • 1:32–1:46 Fill Damaged Areas

5. Step 5: Shape and Finish the Surface

   • 3:40–5:58 Smooth and Finish Concrete Step Repair
   • 0:52–1:02 Smooth and Finish Concrete Patch
   • 3:15–5:02 Shape and Texture the Patch

6. Step 6: Cure the Repair

   • 0:37–0:46 Cure and Protect the Repaired Area
   • 0:28–0:29 Allow Compound to Cure (this video)
   • 11:58–12:06 Cure and Protect Repaired Steps