Smooth and Finish Concrete Step Repair
From How to Repair a Chipped Concrete Step Edge · Step 5 of 6 · Video by Mike Haduck Masonry

Showing 3:40–5:58 of the source video. Watch the full video with every moment.
What happens in this clip
Using a trowel, carefully smooth the newly applied mortar, blending it seamlessly with the surrounding concrete surface of the step. After the mortar has started to set slightly but is still workable, use a damp sponge to gently clean the surface, removing any excess mortar and creating a neat finish. This ensures the patched area matches the texture and appearance of the rest of the step.
Goal: Achieve a smooth and clean finish for the repaired concrete step.
What's used
Tools
- Sponge
- Trowel
About the full video
This project guides through the process of repairing damaged masonry steps, specifically focusing on patching concrete stone steps and reattaching broken brick pieces with appropriate mortar and grout mixes. The repairs aim to restore structural integrity and aesthetic appeal.
Step 5 of 6: Shape and Finish the Surface
While the repair compound is still wet and workable, use a damp trowel or float to smooth the surface. Work from one side to the other, feathering the edges of the repair to blend with the surrounding concrete. Aim to recreate the original rounded or square edge profile of the step. Use a damp brush or sponge for final texturing if needed to match the surrounding concrete.
Every video in How to Repair a Chipped Concrete Step Edge
Step 1: Clean the Chipped Area
- 0:12–0:55 Clean and Prepare the Damaged Area
- 0:46–1:13 Clean Out Debris and Loose Chunks
- 1:36–3:50 Clean Out Loose Concrete and Debris
Step 2: Undercut the Edge (if necessary)
- 0:46–1:13 Clean Out Debris and Loose Chunks
- 1:36–3:50 Clean Out Loose Concrete and Debris
- 0:43–1:02 Prepare Damaged Concrete and Install Forms
Step 3: Mix the Concrete Repair Compound
- 0:39–0:49 Mix Patching Cement
- 1:41–1:54 Mix Concrete Patching Compound
- 1:03–2:18 Mix the Concrete Patcher
Step 4: Apply the Repair Compound
- 1:55–2:11 Apply Concrete Patch to Chips
- 1:15–4:04 Apply Two-Part Epoxy Filler
- 1:32–1:46 Fill Damaged Areas
Step 5: Shape and Finish the Surface
- 3:40–5:58 Smooth and Finish Concrete Step Repair (this video)
- 0:52–1:02 Smooth and Finish Concrete Patch
- 3:15–5:02 Shape and Texture the Patch
Step 6: Cure the Repair
- 0:37–0:46 Cure and Protect the Repaired Area
- 0:28–0:29 Allow Compound to Cure
- 11:58–12:06 Cure and Protect Repaired Steps
How to Repair a Chipped Concrete Step Edge
This project outlines the steps to repair a chipped edge on a concrete step, restoring its appearance and preventing further damage. It involves cleaning the area, applying a suitable concrete repair compound, and finishing the surface.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

