Mix Patching Cement
From How to Repair a Chipped Concrete Step Edge · Step 3 of 6 · Video by HouseCalls

Showing 0:39–0:49 of the source video. Watch the full video with every moment.
What happens in this clip
In a mixing container (like a 'Mix n' Measure' bucket), combine the patching cement with water according to the product's instructions. For this particular repair, a bit of sand was also added to the mix. The addition of sand helps to match the texture and color of the existing step, ensuring a more seamless repair. Mix thoroughly until a consistent, workable paste is achieved.
Goal: Prepare the patching cement for application
What's used
Tools
- Mixing Container ('Mix n' Measure' bucket) QUIKRETE
- Wheelbarrow
- Mixing Trowel
- Sturdy stick
Materials
- QUIKRETE Quick-Setting Cement QUIKRETE
- Sand
- Water
About the full video
This project provides a detailed guide on how to repair a missing corner of a concrete step. It involves preparing the damaged area by drilling holes and installing reinforcement posts, applying a bonding agent to ensure adhesion, mixing and applying patching cement, and finally shaping and blending the new concrete to match the existing structure.
Step 3 of 6: Mix the Concrete Repair Compound
Read the instructions on the concrete repair compound packaging carefully. In a clean mixing container, add the specified amount of powder and then slowly add the recommended amount of water. Mix thoroughly with a trowel or mixing paddle until a smooth, consistent, workable paste is achieved. Avoid mixing more than you can use within the product's pot life.
Every video in How to Repair a Chipped Concrete Step Edge
Step 1: Clean the Chipped Area
- 0:12–0:55 Clean and Prepare the Damaged Area
- 0:46–1:13 Clean Out Debris and Loose Chunks
- 1:36–3:50 Clean Out Loose Concrete and Debris
Step 2: Undercut the Edge (if necessary)
- 0:46–1:13 Clean Out Debris and Loose Chunks
- 1:36–3:50 Clean Out Loose Concrete and Debris
- 0:43–1:02 Prepare Damaged Concrete and Install Forms
Step 3: Mix the Concrete Repair Compound
- 0:39–0:49 Mix Patching Cement (this video)
- 1:41–1:54 Mix Concrete Patching Compound
- 1:03–2:18 Mix the Concrete Patcher
Step 4: Apply the Repair Compound
- 1:55–2:11 Apply Concrete Patch to Chips
- 1:15–4:04 Apply Two-Part Epoxy Filler
- 1:32–1:46 Fill Damaged Areas
Step 5: Shape and Finish the Surface
- 3:40–5:58 Smooth and Finish Concrete Step Repair
- 0:52–1:02 Smooth and Finish Concrete Patch
- 3:15–5:02 Shape and Texture the Patch
Step 6: Cure the Repair
- 0:37–0:46 Cure and Protect the Repaired Area
- 0:28–0:29 Allow Compound to Cure
- 11:58–12:06 Cure and Protect Repaired Steps
How to Repair a Chipped Concrete Step Edge
This project outlines the steps to repair a chipped edge on a concrete step, restoring its appearance and preventing further damage. It involves cleaning the area, applying a suitable concrete repair compound, and finishing the surface.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

