Apply the Concrete Patcher

What happens in this clip

Using the margin trowel, take a portion of the mixed concrete patcher and press it firmly into the chipped concrete area. Ensure that the patcher completely fills the void. Roughly shape the patch to resemble the surrounding concrete, paying attention to any existing edges or contours like a rounded radius. The presenter suggests letting the patch sit for about 10-15 minutes to allow it to partially set before the final shaping and texturing.

Goal: Fill the chipped area with the mixed concrete patcher

What's used

Tools

• Margin Trowel
• Small hand trowel
• Mixed Concrete Patcher Quikrete

About the full video

This DIY project demonstrates how to repair chipped or spalled concrete surfaces using Quikrete Vinyl Concrete Patcher. The process involves preparing the damaged area by moistening it, mixing the concrete patcher to a Play-Doh consistency, applying it to fill the chips, and then shaping and texturing the patch to seamlessly blend with the existing concrete.

Step 3 of 5: Apply the Patching Compound

Using a trowel or putty knife, scoop a portion of the mixed patching compound and press it firmly into the crack or chip. Work the compound into all voids and ensure it makes good contact with the underlying concrete. Overfill slightly to allow for shrinkage and easier feathering.

Open this step in the guide

Other videos for this step

• Mix and Apply Patching Compound
• Apply QUIKRETE Concrete Patching Compound