Connect LED Strips to Motion Detector

What happens in this clip

Connect the individual LED strips to the motion detector. The kit likely includes splitter cables or specific connectors that allow multiple LED strips to be plugged into the motion sensor unit. Carefully align and push the connectors together until they are firmly seated.

Goal: Establish electrical connection between LED strips and motion sensor

What's used

Tools

• LED strip connections
• Motion detector connections

About the full video

This project provides step-by-step instructions for installing LED light strips onto a garage sectional door. The installation involves attaching magnetic LED strips to the door tracks and crossbar, mounting a motion sensor, connecting the various components (LED strips, motion sensor, transformer), and finally plugging the system into a power socket to provide illuminated garage lighting triggered by motion.

Step 4 of 6: Connect LED Strips and Motion Sensor

Follow the specific wiring diagram provided with your LED strip kit and motion sensor. Typically, this involves connecting the strips in series using the provided connectors or by soldering. Connect the output of the final LED strip to the input of the motion sensor. Ensure all connections are secure and properly insulated to prevent short circuits. The motion sensor will then be connected to the power source.

Open this step in the guide

Every video in How to Install Motion-Sensor LED Strip Lights on Stair Treads

1. Step 1: Plan LED Strip Placement

   • 0:00–0:02 Plan and Gather Components
   • 0:00–0:19 Install Flexible LED Strip Lighting
   • 5:35–6:58 Plan Light Placement and Spacing

2. Step 2: Prepare Stair Treads

   • 0:00–0:01 Prepare Staircase for LED Installation
   • 0:10–0:12 Install LED Strips on Stair Treads
   • 0:02 Prepare Stair Surface

3. Step 3: Install LED Strips

   • 0:10–0:12 Install LED Strips on Stair Treads
   • 0:01–0:04 Apply LED Strip Lights to Treads
   • 0:00–0:19 Install Flexible LED Strip Lighting

4. Step 4: Connect LED Strips and Motion Sensor

   • 0:09–0:09 Connect Controller, Sensors, and Power Supply
   • 0:41–0:45 Connect LED Strips to Motion Detector (this video)
   • 1:22–1:36 Connect Interconnect Cable to LED Strip/Panel

5. Step 5: Mount Motion Sensor and Power Supply

   • 13:17–14:27 Mount Motion Sensors and Electronic Box
   • 3:50–4:30 Mount and Test the Motion Sensor
   • 3:25–4:32 Install and Wire Motion Sensors

6. Step 6: Test the System

   • 0:02–0:14 Test Motion Sensor Functionality
   • 0:10–0:11 Test Functionality and Observe Results
   • 0:07–0:10 Test Electrical Components