Allow Coating to Cure and Verify Non-Slip Property

What happens in this clip

After the non-slip coating has been applied, it must be allowed to cure completely as per the manufacturer's instructions. This curing process typically takes several hours to a few days, depending on environmental conditions like temperature and humidity. Once cured, the video demonstrates the effectiveness of the coating by showing water beading on the surface, indicating its hydrophobic properties and the successful creation of a non-slip profile. The final views showcase the enhanced appearance and safety of the entire pool deck, including the pool and jacuzzi areas, now protected with a durable, long-lasting finish.

Goal: Ensure the coating cures properly and verify its non-slip and protective qualities

What's used

Materials

• Water

About the full video

This project demonstrates the application of a durable non-slip coating with nano beads to a travertine pool deck. The coating, applied via a spray applicator, creates a long-lasting, textured surface that significantly improves slip resistance and protects the natural stone, offering a superior alternative to traditional sealers.

Step 5 of 5: Cure and Inspect

Let the anti-slip coating, strips, or paint cure completely according to the manufacturer's specified drying and curing times. Avoid walking on the stairs during this period. Once cured, walk carefully on each step to test the slip resistance. Visually inspect the entire surface for any missed spots, uneven application, or areas where the material may not have adhered properly. Address any issues as recommended by the product manufacturer.

Open this step in the guide

Every video in How to Make Concrete Basement Stairs Non-Slip

1. Step 1: Prepare the Concrete Stairs

   • 1:13–1:37 Prepare the Surface
   • 0:28–1:00 Prepare Rough Concrete Steps for Resurfacing
   • 1:13–1:50 Apply Cleaner to Stairs

2. Step 2: Apply Anti-Slip Coating

   • 2:27–3:10 Apply Paint to Stairs
   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

3. Step 3: Install Anti-Slip Tread Strips

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:20–0:45 Peel and Adhere Strip
   • 1:12–1:19 Prepare Steps and Apply Non-Skid Strips

4. Step 4: Apply Textured Paint

   • 2:27–3:10 Apply Paint to Stairs
   • 10:24–11:30 Final Paint and Allow to Dry
   • 0:20–0:31 Painting the Staircase

5. Step 5: Cure and Inspect

   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 1:23–1:28 Allow Coating to Dry
   • 1:49–2:10 Allow Coating to Cure and Verify Non-Slip Property (this video)