Apply Paint to Stairs

What happens in this clip

Starting from the top step and working your way down, use a paintbrush to apply an even coat of the anti-slip paint mixture to the concrete treads. Ensure that each step is fully covered. The texture from the sand should be visible and palpable. Apply consistently, mixing the paint frequently in your tray to redistribute the sand, ensuring a uniform finish across all steps.

Goal: Apply the anti-slip paint evenly to the concrete staircase.

What's used

Tools

• Paintbrush

Materials

• Anti-Slip Paint Mixture Davies Acreex (custom mix)

About the full video

This project guides you through creating and applying your own anti-slip paint for concrete surfaces, specifically a slippery staircase. By mixing fine-grained sand with rubberized floor coating, you can significantly increase traction and prevent falls. The process involves cleaning the surface, sifting sand, mixing it with paint in small batches, and applying it evenly to achieve a durable, non-slip finish.

Step 2 of 5: Apply Anti-Slip Coating

Once the stairs are completely dry, apply the anti-slip coating according to the manufacturer's instructions. This may involve rolling or brushing the coating onto the surface. Work in sections, ensuring a consistent thickness and avoiding puddles or thin spots. For products that contain aggregate, stir them frequently to keep the grit evenly distributed. Allow the first coat to dry completely as per the product's recommendations before applying a second coat, if necessary.

Open this step in the guide

Every video in How to Make Concrete Basement Stairs Non-Slip

1. Step 1: Prepare the Concrete Stairs

   • 1:13–1:37 Prepare the Surface
   • 0:28–1:00 Prepare Rough Concrete Steps for Resurfacing
   • 1:13–1:50 Apply Cleaner to Stairs

2. Step 2: Apply Anti-Slip Coating

   • 2:27–3:10 Apply Paint to Stairs (this video)
   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

3. Step 3: Install Anti-Slip Tread Strips

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:20–0:45 Peel and Adhere Strip
   • 1:12–1:19 Prepare Steps and Apply Non-Skid Strips

4. Step 4: Apply Textured Paint

   • 2:27–3:10 Apply Paint to Stairs
   • 10:24–11:30 Final Paint and Allow to Dry
   • 0:20–0:31 Painting the Staircase

5. Step 5: Cure and Inspect

   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 1:23–1:28 Allow Coating to Dry
   • 1:49–2:10 Allow Coating to Cure and Verify Non-Slip Property