Final Paint and Allow to Dry

What happens in this clip

Once all stair treads and risers are securely installed, apply a final coat of the heavy-based oil paint (or your chosen exterior-grade paint) to all visible wooden surfaces of the stairs. This not only enhances the aesthetic appeal but also adds an additional layer of protection against weathering and moisture. After painting, create a temporary barrier (such as a string or ribbon) across the stairs to prevent anyone from walking on them for at least a day or two, allowing the paint to fully dry and cure.

Goal: Complete the stairs with a protective paint finish and ensure proper drying time.

What's used

Tools

• Heavy-based Oil Paint
• Weather-resistant acrylic paint
• Paint Brush/Roller
• String or Ribbon

About the full video

This project provides a detailed guide on replacing old, rotted deck stairs with new, pre-painted stringers. It covers the removal of existing stairs, strategic preparation of new wooden stringers for durability in humid climates, installing waterproofing membrane, ensuring proper alignment with the house foundation, adjusting for uneven surfaces, and securely fastening the risers and treads, culminating in a finished, painted set of stairs.

Step 4 of 5: Apply Textured Paint

After cleaning and ensuring the stairs are dry, apply a coat of textured anti-slip paint. Use a brush for edges and a roller for the main surfaces. Apply the paint evenly, following the manufacturer's recommended application methods. Allow the first coat to dry thoroughly according to the product's instructions. Apply a second coat if a deeper texture or more durable finish is desired. Ensure proper ventilation during application and drying.

Open this step in the guide

Every video in How to Make Concrete Basement Stairs Non-Slip

1. Step 1: Prepare the Concrete Stairs

   • 1:13–1:37 Prepare the Surface
   • 0:28–1:00 Prepare Rough Concrete Steps for Resurfacing
   • 1:13–1:50 Apply Cleaner to Stairs

2. Step 2: Apply Anti-Slip Coating

   • 2:27–3:10 Apply Paint to Stairs
   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

3. Step 3: Install Anti-Slip Tread Strips

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:20–0:45 Peel and Adhere Strip
   • 1:12–1:19 Prepare Steps and Apply Non-Skid Strips

4. Step 4: Apply Textured Paint

   • 2:27–3:10 Apply Paint to Stairs
   • 10:24–11:30 Final Paint and Allow to Dry (this video)
   • 0:20–0:31 Painting the Staircase

5. Step 5: Cure and Inspect

   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 1:23–1:28 Allow Coating to Dry
   • 1:49–2:10 Allow Coating to Cure and Verify Non-Slip Property