Allow Coating to Dry and Enjoy the Renewed Surface

What happens in this clip

After applying the textured acrylic concrete coating, allow it to dry and cure completely according to the manufacturer's recommendations. This is a crucial step to ensure the coating achieves its maximum durability and non-slip properties. Once fully dry, your concrete surface will be transformed, showcasing a fresh, clean, and significantly safer non-slip finish that enhances the overall appearance of your outdoor areas.

Goal: Achieve a durable, safe, and aesthetically improved concrete surface.

About the full video

This DIY project details how to revitalize old, worn, and potentially slick concrete surfaces, such as steps, patios, sidewalks, and driveways, using a specialized textured acrylic concrete coating. The process involves thorough cleaning of the existing concrete, followed by the application of the coating to restore aesthetic appeal and, more importantly, to create a durable, safe, non-slip finish.

Step 5 of 5: Cure and Inspect

Let the anti-slip coating, strips, or paint cure completely according to the manufacturer's specified drying and curing times. Avoid walking on the stairs during this period. Once cured, walk carefully on each step to test the slip resistance. Visually inspect the entire surface for any missed spots, uneven application, or areas where the material may not have adhered properly. Address any issues as recommended by the product manufacturer.

Open this step in the guide

Every video in How to Make Concrete Basement Stairs Non-Slip

1. Step 1: Prepare the Concrete Stairs

   • 1:13–1:37 Prepare the Surface
   • 0:28–1:00 Prepare Rough Concrete Steps for Resurfacing
   • 1:13–1:50 Apply Cleaner to Stairs

2. Step 2: Apply Anti-Slip Coating

   • 2:27–3:10 Apply Paint to Stairs
   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

3. Step 3: Install Anti-Slip Tread Strips

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:20–0:45 Peel and Adhere Strip
   • 1:12–1:19 Prepare Steps and Apply Non-Skid Strips

4. Step 4: Apply Textured Paint

   • 2:27–3:10 Apply Paint to Stairs
   • 10:24–11:30 Final Paint and Allow to Dry
   • 0:20–0:31 Painting the Staircase

5. Step 5: Cure and Inspect

   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface (this video)
   • 1:23–1:28 Allow Coating to Dry
   • 1:49–2:10 Allow Coating to Cure and Verify Non-Slip Property