Allow Coating to Dry

What happens in this clip

After applying the coating, allow it to dry completely according to the manufacturer's recommendations. Drying times can vary significantly based on temperature, humidity, and the specific product used, often ranging from a few hours for light foot traffic to 24-72 hours for full cure and heavy use. Once fully dry, you will have transformed your old, slippery concrete into a fresh, clean, and safe surface that looks just like new.

Goal: Achieve a fully dry and cured concrete surface.

About the full video

This project provides instructions on how to revitalize old, worn, and slippery concrete surfaces by applying a textured acrylic concrete coating. The process involves thoroughly cleaning the concrete and then rolling on the specialized coating to restore its appearance and create a safe, non-slip finish.

Step 5 of 5: Cure and Inspect

Let the anti-slip coating, strips, or paint cure completely according to the manufacturer's specified drying and curing times. Avoid walking on the stairs during this period. Once cured, walk carefully on each step to test the slip resistance. Visually inspect the entire surface for any missed spots, uneven application, or areas where the material may not have adhered properly. Address any issues as recommended by the product manufacturer.

Open this step in the guide

Every video in How to Make Concrete Basement Stairs Non-Slip

1. Step 1: Prepare the Concrete Stairs

   • 1:13–1:37 Prepare the Surface
   • 0:28–1:00 Prepare Rough Concrete Steps for Resurfacing
   • 1:13–1:50 Apply Cleaner to Stairs

2. Step 2: Apply Anti-Slip Coating

   • 2:27–3:10 Apply Paint to Stairs
   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

3. Step 3: Install Anti-Slip Tread Strips

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:20–0:45 Peel and Adhere Strip
   • 1:12–1:19 Prepare Steps and Apply Non-Skid Strips

4. Step 4: Apply Textured Paint

   • 2:27–3:10 Apply Paint to Stairs
   • 10:24–11:30 Final Paint and Allow to Dry
   • 0:20–0:31 Painting the Staircase

5. Step 5: Cure and Inspect

   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 1:23–1:28 Allow Coating to Dry (this video)
   • 1:49–2:10 Allow Coating to Cure and Verify Non-Slip Property