Install LED Light Fixture
From Recessed Staircase Lighting · Step 5 of 8 · Video by Daru Dhillon
Showing 4:46–5:24 of the source video.
What happens in this clip
The LED light fixture is designed with spring-loaded clips on its sides. Before inserting the light into the ceiling, push both springs upwards towards the light fixture. Carefully insert the light into the ceiling hole, guiding one spring in at a time. Once one spring clears the edge of the drywall, push the other spring in. The springs will then snap open, securing the light fixture firmly against the ceiling. Gently push the light until it sits flush and snug against the ceiling, ensuring there are no gaps. Finally, turn the power back on at the circuit breaker and test your new LED light.
What's used
Tools
- LED Light Fixture
About the full video
This project provides verbose step-by-step instructions for installing energy-efficient LED wafer-style recessed lighting fixtures. It covers marking the ceiling, cutting the hole, safely handling electrical wires, making proper connections using a junction box and connector fittings, and finally installing the LED trim.
Step 5 of 8: Install Light Fixtures
Gently feed the electrical cable through the back of the recessed light housing. Insert the fixture into the opening, ensuring it sits flush against the wall. Most recessed lights have spring clips or mounting brackets that will secure the fixture to the drywall. Engage these clips or brackets according to the manufacturer's instructions. Ensure the fixture is stable and securely fastened.
Other videos for this step
Recessed Staircase Lighting
This project involves planning the layout, safely running electrical wiring, cutting holes in the wall, installing the light fixtures, and connecting them to a power source. It's a moderately complex electrical project that requires careful attention to safety and building codes.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.