Shim the Low Spots
From Squeaky Stair Repair · Step 4 of 7 · Video by Blue_Collar_JR VENEGAS

Showing 0:11–0:13 of the source video. Watch the full video with every moment.
What happens in this clip
To correct the unlevelness, insert one or more small, thin pieces of wood, known as shims, underneath the low sections of the board. Gently tap the shims into place until the board appears to be visually closer to level. The thickness and number of shims will depend on how much the board needs to be raised.
Goal: Raise the low sections of the wooden frame using shims
What's used
Tools
- Hammer
- Wooden block
- Wooden Shims
- Cedar shims
About the full video
This project demonstrates how to level a wooden frame, such as for a deck or a raised garden bed, using a spirit level and small wooden shims. The video focuses on correcting an unlevel rim board by inserting shims underneath until the board is perfectly horizontal.
Step 4 of 7: Shim Gaps
Cut thin strips of wood (shims) to fit snugly into any gaps identified. Apply a small amount of wood glue to the shim and tap it gently into the gap with a hammer until it's secure. Trim any excess shim material flush with the surface.
Every video in Squeaky Stair Repair
Step 1: Identify Squeak Source
- 0:00–0:38 Diagnose the Squeaky Stair Problem
- 0:00–0:09 Locate the Squeak
- 2:21–3:48 Diagnose Creaking Causes
Step 2: Inspect for Loose Tread or Riser
- 0:00–0:30 Locate Squeak and Assess Access
- 2:21–3:48 Diagnose Creaking Causes
- 0:00–0:38 Diagnose the Squeaky Stair Problem
Step 3: Tighten Fasteners
- 6:48–10:07 Address Additional Squeaky Spots
- 0:49–1:04 Fix Squeaks from Above (Hardwood/Laminate with Nails)
- 2:09–2:47 Drive Trim Head Screw
Step 4: Shim Gaps
- 0:54–1:14 Trim Excess Shim for a Flush Finish
- 0:11–0:13 Shim the Low Spots (this video)
- 1:47–2:12 Insert Wood Shims into Hole
Step 5: Apply Lubricant or Powder
- 0:52–2:39 Apply Powder
- 0:34–0:54 Apply Dry Lubricant to Eliminate Squeaks
- 2:51–3:25 Eliminate Creaking Floors with Talcum Powder
Step 6: Secure from Underside (if accessible)
- 0:49–1:06 Reinforce from Underside with Screws
- 1:48–2:20 Secure Risers to Treads from Behind
- 4:46–5:44 Attach Support Blocks and Secure Wedges
Step 7: Test the Repair
- 9:40–9:57 Final Check and Confirmation
- 3:30–3:44 Test for Squeaks and Fill Holes
- 0:27–0:32 Final Inspection and Testing
Questions about Squeaky Stair Repair
What are the most common reasons stairs squeak, and how does this project address them?
Stairs typically squeak due to loose treads or risers rubbing against the stair frame, or when fasteners become loose, creating friction and movement. This project directly tackles these issues by tightening connections, shimming gaps to eliminate movement, and applying lubricants to reduce friction at contact points.
What specialized tools or materials will I need beyond standard DIY equipment for this project?
While basic screwdrivers and pliers are essential, you'll also need a nail set to recess nails, a framing hammer for precise adjustments, and a utility knife for trimming shims. Specific materials include wood shims, scrap wood blocks for support, angle brackets for reinforcement, and #10 3-inch wood screws.
How difficult is this project for a beginner, and what's the estimated time commitment?
This project is considered beginner-friendly as it primarily involves diagnosis and simple mechanical fixes. The estimated 4-hour timeframe is generally achievable, but locating the precise source of the squeak can sometimes be the most time-consuming part of the process.
What should I do if I can't access the underside of my stairs to secure components?
If the underside is inaccessible, focus on top-side solutions. You can drive screws through the top of treads into risers or stringers, or use shims and adhesive between loose components from above. Specialized anti-squeak kits, which often involve small screws or plugs inserted from the top, are also available.
Are there any common mistakes to avoid, or safety tips to keep in mind while repairing squeaky stairs?
A common mistake is failing to accurately pinpoint the squeak's source before attempting a fix, which can lead to ineffective repairs. For safety, ensure the staircase is well-lit and clear of obstructions, mark any steps temporarily out of use, and keep tools securely placed to prevent tripping hazards.
Can I use any type of lubricant or powder, or are there specific recommendations for eliminating stair squeaks?
For lubrication, talcum powder or powdered graphite are highly effective for reducing friction between wood components without creating a greasy mess. Avoid using oily lubricants, as these can attract dust and grime, potentially worsening the squeak over time or staining the wood.
Squeaky Stair Repair
This project addresses the common issue of squeaky stairs by identifying the source of the noise and applying targeted fixes to eliminate it. The process involves a systematic approach to diagnose the cause, which can range from loose treads or risers to friction between wood components, and then implementing appropriate solutions such as tightening fasteners, shimming gaps, or applying lubricants.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

