Measure and Cut Wallpaper for Risers

What happens in this clip

Before applying the wallpaper, the existing stair risers are shown, highlighting their worn and damaged state. The adjacent wall stringers have already received a first coat of white paint. The stair tread gauge is then used to measure the exact angles of the stair risers. The presenter advises ensuring the wallpaper is oriented 'right side up' before cutting. A box cutter is used to precisely cut the wallpaper along the measured lines from the gauge, ensuring a perfect fit.

Goal: Accurately cut wallpaper to fit the unique angles of each stair riser.

What's used

Tools

• Box Cutter
• Craft knife
• Stair Tread Gauge Homemade
• Protractor

Materials

• Paintable Textured Wallpaper

About the full video

This DIY project details how to reface old, worn stair risers using paintable textured wallpaper. The process emphasizes using a homemade stair tread gauge to achieve accurate angle cuts for the wallpaper and applying an additional adhesive to ensure strong, lasting adhesion. The goal is to revitalize the appearance of the stairs without major reconstruction.

Step 2 of 6: Measure and Cut Wallpaper/Stencil Material

Measure the height and width of each stair riser. Add approximately 1-2 inches to each measurement for trimming. Transfer these dimensions to the back of the peel-and-stick wallpaper or to your stencil material, and cut precisely using a sharp utility knife or scissors.

Open this step in the guide

Other videos for this step

• Measure Risers
• Repeat Stenciling for Subsequent Risers