Apply Water-Based Primer Undercoat

What happens in this clip

Now, apply a coat of Farrow & Ball water-based primer undercoat to the entire skirting board. This layer will further improve adhesion for the topcoat and provide a uniform base color. Use a paint brush to apply an even coat, ensuring full coverage without drips or excessive buildup. Allow this undercoat to dry completely according to the manufacturer's instructions.

Goal: Provide a uniform base and improve topcoat adhesion.

What's used

Tools

• Farrow & Ball Water-Based Primer Undercoat Farrow & Ball
• Paint Brush
• Paint Kettle

About the full video

This DIY project details the process of transforming varnished skirting boards into a clean, painted finish. It covers essential preparation steps like taping, sanding, and dust removal, followed by applying specialized primers and undercoats to prevent discolouration, and finishing with multiple coats of water-based topcoat for a durable and aesthetically pleasing result.

Step 10 of 10: Prime and Paint

Apply a coat of high-quality primer to all new trim and skirt boards. Allow the primer to dry completely. Lightly sand any areas that feel rough after priming. Apply your chosen paint color in thin, even coats. Allow each coat to dry thoroughly before applying the next. Typically, two coats of paint are sufficient for good coverage.

Open this step in the guide

Other videos for this step

• Paint on Undercoat or Primer
• Apply First Coat of Paint