Sand Filled Areas Smooth
From Stair Skirt Boards and Trim Refresher · Step 9 of 10 · Video by The Life of the Zigs
Showing 1:00–1:05 of the source video.
What happens in this clip
Once the wood filler is completely dry, use a random orbital sander (or sanding block) with fine-grit sandpaper to sand all filled areas until they are smooth and flush with the trim surface. Pay close attention to the seams and nail holes. For cleaner sanding, attach a dust collection hose to your sander, and wear a dust mask and safety glasses to protect yourself from airborne particles.
Goal: Achieve a smooth, flush surface ready for painting.
What's used
Tools
- Dust Collection Hose
- Dust Mask
- Fine-Grit Sandpaper
- Random Orbital Sander Ryobi
- Detail sander
- Safety Glasses
About the full video
This project guides you through installing Craftsman-style door trim for under $50. It involves measuring, cutting, and securely attaching vertical and horizontal wooden boards around a door frame, followed by filling nail holes, caulking seams, sanding, and finally painting to achieve a clean, classic look.
Step 9 of 10: Sand and Prep for Painting
Once the wood filler is dry, lightly sand all the filled nail holes and any rough spots on the new skirt boards and trim with fine-grit sandpaper. The goal is to create a smooth surface for painting. After sanding, wipe down all surfaces with a tack cloth or a slightly damp cloth to remove all dust.
Other videos for this step
Stair Skirt Boards and Trim Refresher
This project involves removing old stair skirt boards and trim, preparing the wall and stairs, and installing new skirt boards and trim for a refreshed look. It includes measuring, cutting, fitting, fastening, and finishing the new trim pieces.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.