powered by

Prepare Surface by Filling Holes

From How to Get a Hardwood Look on Carpeted Stairs · Step 3 of 11 · Video by Michael Mahoney

Showing 1:40–2:44 of the source video. Watch the full video with every moment.

What happens in this clip

After removing all carpet, inspect the stair treads and risers for any cracks, gaps, or holes left by nails and staples. Apply a sandable, water-based wood filler to these imperfections, ensuring a smooth, level surface. The video shows using Varathane Sandable Wood Filler, Natural.

Goal: Fill all cracks, gaps, and nail holes with wood filler.

What's used

Tools

  • Putty Knife or Small Spatula

Materials

  • Varathane Sandable Wood Filler (Water Based
  • Natural) Varathane
  • Elmer's Wood Filler
  • cracks
  • and gaps in the wood.

About the full video

This project details the process of transforming carpeted entryway stairs into sleek, modern hardwood stairs with dark stained treads and white painted risers. It covers everything from removing old carpet to preparing the surfaces, filling imperfections, sanding, staining, sealing, and finally painting, while providing practical tips for DIY enthusiasts.

Step 3 of 11: Inspect and Repair Stair Structure

Thoroughly inspect the existing stair treads and risers. Look for any signs of rot, cracks, loose boards, or other damage. Small cracks can often be filled with wood filler. Larger damaged areas may require cutting out the section and replacing it with a new piece of wood. Ensure all repairs are securely fastened and flush with the surrounding surface.

Open this step in the guide

Every video in How to Get a Hardwood Look on Carpeted Stairs

  1. Step 1: Remove Carpet and Padding

  2. Step 2: Remove Staples and Nails

  3. Step 3: Inspect and Repair Stair Structure

  4. Step 4: Clean and Sand Stair Surfaces

  5. Step 5: Measure and Cut Hardwood Treads and Risers

  6. Step 6: Install Hardwood Risers

  7. Step 7: Install Hardwood Treads

  8. Step 8: Install Stair Nosing (if applicable)

  9. Step 9: Fill Nail Holes and Gaps

  10. Step 10: Sand Repaired Areas and Final Surface

  11. Step 11: Apply Finish (Stain and Sealant)

How to Get a Hardwood Look on Carpeted Stairs

This project outlines the process of removing carpet from stairs and installing a hardwood finish to achieve a hardwood look. It involves removing existing carpet, preparing the stair treads, and installing new hardwood treads and risers.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Prepare Surface by Filling Holes — How to Get a Hardwood Look on Carpeted Stairs | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.