powered by

Sand and Clean Stairs

From How to Get a Hardwood Look on Carpeted Stairs · Step 10 of 11 · Video by Welcome to the Woods

Showing 1:21–1:35 of the source video. Watch the full video with every moment.

What happens in this clip

After the wood filler has dried, sand all filled areas smooth and flush with the surrounding wood surface. Use an orbital sander or sandpaper for this task, ensuring a smooth finish. Once sanding is complete, use a tack cloth to thoroughly wipe down all stair surfaces, removing all sanding dust and debris to prepare for priming and painting.

Goal: Achieve a smooth, clean surface on the stairs ready for primer.

What's used

Tools

  • Dust Mask
  • Orbital Sander
  • Safety Glasses

Materials

  • Sandpaper
  • Tack Cloth

About the full video

This DIY project details the complete transformation of an old, carpeted staircase into a modern, visually appealing set of stairs with laminate treads and painted risers. The process involves removing old carpet, prepping the stairs, painting, modifying existing treads, installing new laminate, and reinstalling a painted railing.

Step 10 of 11: Sand Repaired Areas and Final Surface

Once the wood filler is completely dry, use a sanding block or fine-grit sandpaper (220 grit) to gently sand down the filled areas until they are flush with the surrounding wood. Then, lightly sand the entire surface of all treads and risers to ensure a uniform smoothness. Remove all sanding dust thoroughly with a vacuum and tack cloth.

Open this step in the guide

Every video in How to Get a Hardwood Look on Carpeted Stairs

  1. Step 1: Remove Carpet and Padding

  2. Step 2: Remove Staples and Nails

  3. Step 3: Inspect and Repair Stair Structure

  4. Step 4: Clean and Sand Stair Surfaces

  5. Step 5: Measure and Cut Hardwood Treads and Risers

  6. Step 6: Install Hardwood Risers

  7. Step 7: Install Hardwood Treads

  8. Step 8: Install Stair Nosing (if applicable)

  9. Step 9: Fill Nail Holes and Gaps

  10. Step 10: Sand Repaired Areas and Final Surface

  11. Step 11: Apply Finish (Stain and Sealant)

How to Get a Hardwood Look on Carpeted Stairs

This project outlines the process of removing carpet from stairs and installing a hardwood finish to achieve a hardwood look. It involves removing existing carpet, preparing the stair treads, and installing new hardwood treads and risers.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Sand and Clean Stairs — How to Get a Hardwood Look on Carpeted Stairs | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.