powered by

Repair and Prepare Stair Structure

From How to Get a Hardwood Look on Carpeted Stairs · Step 3 of 11 · Video by Mindwave Creations

Showing 0:09–0:14 of the source video. Watch the full video with every moment.

What happens in this clip

After removing the old railing, inspect the underlying stair structure for any damage, especially around the areas where the newel posts were previously anchored. The video indicates the stairs were in much worse condition than expected. Use wood filler or construction adhesive to repair any rotten, broken, or unstable wooden sections of the stringers, treads, or risers. A saw may be needed to cut away severely damaged wood before filling or patching. Ensure all repairs are solid and flush with the existing structure to provide a stable foundation for the new components.

Goal: Ensure the underlying stair structure is sound and ready for new components.

What's used

Tools

  • Hammer
  • Saw
  • Utility knife
  • Spreader/Applicator
  • Scraper

Materials

  • Construction Adhesive
  • Expanding foam adhesive
  • Wood Filler
  • Epoxy wood repair compound
  • holes
  • and repairing damaged wood.

About the full video

This DIY project details a complete staircase renovation, transforming an old, worn-out staircase into a modern and elegant feature. The process involves the demolition of existing railings, structural repairs to the stairs, removal of old carpet and installation of new, and finally, the precise installation of new newel posts, oak handrails, and metal balusters. The project concludes with the addition of decorative caps, showcasing a significant aesthetic and structural upgrade in a relatively short timeframe.

Step 3 of 11: Inspect and Repair Stair Structure

Thoroughly inspect the existing stair treads and risers. Look for any signs of rot, cracks, loose boards, or other damage. Small cracks can often be filled with wood filler. Larger damaged areas may require cutting out the section and replacing it with a new piece of wood. Ensure all repairs are securely fastened and flush with the surrounding surface.

Open this step in the guide

Every video in How to Get a Hardwood Look on Carpeted Stairs

  1. Step 1: Remove Carpet and Padding

  2. Step 2: Remove Staples and Nails

  3. Step 3: Inspect and Repair Stair Structure

  4. Step 4: Clean and Sand Stair Surfaces

  5. Step 5: Measure and Cut Hardwood Treads and Risers

  6. Step 6: Install Hardwood Risers

  7. Step 7: Install Hardwood Treads

  8. Step 8: Install Stair Nosing (if applicable)

  9. Step 9: Fill Nail Holes and Gaps

  10. Step 10: Sand Repaired Areas and Final Surface

  11. Step 11: Apply Finish (Stain and Sealant)

How to Get a Hardwood Look on Carpeted Stairs

This project outlines the process of removing carpet from stairs and installing a hardwood finish to achieve a hardwood look. It involves removing existing carpet, preparing the stair treads, and installing new hardwood treads and risers.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Repair and Prepare Stair Structure — How to Get a Hardwood Look on Carpeted Stairs | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.